Top Coat SF
One coat PU system
Paints Index
- Roof Repair Heat Proofing & Protection
- Water Tank Heat Proofing & Rust Protection
- Boiler, Tubewell, Water supply & Sanitary Pipes Protection
- Brass & Metal ware Protection
- Marine machinery & Bridge Protection
- Automobile / Vehicle body & Undercarriage Care
- Rail Locomotive / Wagon Paints & Coatings
- Dr. SALT PETRE
- TOPCOAT
- WHITE KNIGHT ECOTOUCH (Regal)
- WHITE KNIGHT ECOTOUCH
- C - MAX
- BLACK COAT
- NEGATIVE WATER PROOFING
- TOPCOAT SG (Wood)
- METAL BANDAGE SYSTEMS
- CORROSION RESISTANCE
- METALLIC COLD SOLDERS
- TERMISOL
TOPCOAT SF - One coat PU system
TOPCOAT SF is a chemical and heat resistance material, up to a temperature of 180 deg.C., suitable for application by brush or spray. It is an excellent coating for corrosion resistance, insulation & damp walls etc. Coating achieved with this PU is extremely hard and is resistance to oil, alkali, alcohol, salt water, sulphuric acid solution up to 30% concentration level (24 hours).
It is strongly recommended for coastal areas, where the humidity levels are very high and some times, it goes up to 90-95% and no other coating takes the grip, because of invisible slat deposit on the structures. This coating will protect the structures, steels and equipments in Oil Refineries, Solvent Chemical Industries and Onshore structures, which are subjected to severe saline conditions and where the problem is proper drying and curing of the polymer, after being coated.
This coating is resistance to Aggressive corrosion through micron build up is between 15-25 microns. Depending on the base surface and the spraying conditions, this coating dries in presence of moisture and attains strength.
| TYPICAL PROPERTIES |
| Nature | - |
| Colour | Transparent |
| Specific Gravity | - |
| pH | - |
| Percentage Volume Solid | 32%+ |
| Temperature resistance | - |
| Drying (Tack Free) Time | Surface Dry 15 to 30 minutes; Hard dry - 3 hours |
| Touch Dry | 3 hours |
| Recotability Time | 1 Hour |
| Inerval before over coating | 60 Minutes |
| Complete Curing Time | 24 Hours |
| Number of Coats | - |
| Adhesion | - |
| Flexibility | - |
| Paintability | - |
| Breathability | - |
| Finish | Glaze |
| Flash point | Above 30 Degrees C |
| Pot Life | Once you open the tin, it is advisable to consume it |
| Storage Life | 12 months, if the tin is not opened and is kept in sealed condition |
| Dry Film Thickness | Transparent 15-20 microns |
| Coverage without Loss Factor Coverage with loss factor 20% Coverage with loss factor 30% Coverage with loss factor 40% |
20 sq.meter/litre 16 sq.meter/litre 14 sq.meter/litre 12 sq.meter/litre |
| Suitable Solvent | - |
| Thinner | Insulthin Universal |
| Packaging | 500 ml., 1 Litre, and 4 Litre |
| Container | - |
Reach us
VIVID INDIA
B-61, Vivid House, Pushpanjali Enclave
Pitampura, Delhi 110 034, INDIA
+91-11-2702 4086 / 4586 / 4686; +91-93127 05186; +91-11-3255 5186
+91-11-2701 1532
Vivid eMail